Aem V2 1 Gallon Water Meth Injection Kit (wmi) For Opel Astra H Vxr Mk5 2.0t

Aem v2 1 gallon water meth injection kit (wmi) for Opel astra h vxr mk5 2.0t. This product sheet is originally written in English. Please find below a machine translation in French.

If you have any questions please contact us. Aem methamphetamine injection kit v2 1 gallon (wmi) for vauxhall astra h vxr mk5 2.0t models. Product characteristics: - "boost safe" safety outlet included for complete safety under all conditions, see water/methanol safety device. The internal by-pass water/methanol injection pump does not turn off and offers quiet and fluid operation.

It features a robust construction consisting of integrated pipe fittings, epdm joints and a santoprene diaphragm that provides a consistent and reliable fluid distribution - precisely machined aluminium billet injector with integrated non-return valve - three interchangeable injector nozzles to cover a wide variety of hp levels 250 cc/min, 500 cc/min and 1,000 cc/min - 1 gallon tank (10" x 8.5" x 4.25) with integrated low-liquid conductive sensor and positive locking connector water/methanol systems without tank available, aem 30-3302. Includes a controller with an integrated 35 psi map sensor - 20 feet nylon injection tube included - LED dashboard indicator for system condition and low fluid warning please note: this kit is suitable for vehicles operating at 35psi or less. If you use more than 35psi, you need 30-3302. Injection of water/methanol for gas engines is a proven way to effectively reduce the temperature of the intake air of the engine and to remove harmful detonations on the induction-forced and high-performance motors with natural suction.

This allows riders to reliably increase the boost and advance of ignition, without using high octane-index running fuel, for power gains of up to 20%. Aemles water/methanol injection systems use the most robust equipment combined with more advanced features than any other water/methanol system at comparable prices. The progressive controller at the request of the water/methanol injection kit dependent on the boost pn30-3300 aem bases the injection rate on the collector pressure using an integrated map sensor (up to 35 psi boost) to ensure the right amount of water/methanol injection at any point of the engine power curve. Engineers have spent a lot of time developing the controller's flow control strategy for a more linear flow output delivery. This means that the flow better meets the needs of a water/methanol injection engine, which further optimizes the cooling of the supercharged air and the control of detonation.

The controller's new design includes large rotation-resistant buttons and larger numbering to easily define accurate full start and activation points, with a covered state led and test buttons for increased splash resistance. A plug is integrated into the controller housing to connect to the positive locking connector of the redesigned cable beam. The booster-dependent controller housing has a moulded canned nipple to accept a power supply hose and a caption of cabling at the rear, an integrated fuse and moulded mounting tabs. Aemle wiring beam of the s-boost-dependent water injection/methanol kit is completed with a positive locking connector at one end and has colour-coded wires to facilitate installation.

The pump feed and earth wires are included in the beam, which simplifies the wiring process and eliminates any risk of accidental pump activation due to a short circuit in the system. An additional wire is included to add an optional on/off solenoid to stop fluid flow when the system is inactive. Aemle 1 gallon compact tank of the petrol water/methanol injection system, pn 30-3300, depending on the thrust, includes a low level indicator of high-tech conductive fluid with a positive locking connector and colour wires matching the cable beam. The dependent boost controller includes a built-in map sensor with large adjustment buttons, an integrated socket for the connection of the beam, an integrated fuse, a covered status light and a test button for better splash resistance and a mounting tab. The wiring beam ends with a positive locking connector at one end with colour-coded wires to facilitate installation, power and earth wires for the pump and an additional wire for the optional on/off solenoid fluid.

Benefits of water/methanol injection for gas engines. Reduces inlet loading time the term "liquid intermediate cooling" with water/methanol injection refers to a highly atomized water/methanol mist that is injected into the air stream and begins to evaporate.

As it does, this evaporative effect reduces air load temperatures up to 100 degrees and provides a higher oxygen load. Reduces detonation (frapper) water absorbs heat and methanol is a cold-burning, anti-detonant fuel.

When combined and introduced into the intake stream, they can effectively increase the anti-detonation index of your vehicle so that you can reliably increase the surge pressure and the setting of the advanced ignition using the pump gas. Reduces carbon deposition Modern vehicles equipped with exhaust recirculation devices (egr) for emission control promote high carbon accumulation within air intake. This accumulation of carbon can create "hot spots" in combustion chambers that can cause detonation. Water/methanol injection has a "steam cleaning" effect that reduces this accumulation of carbon and, in some cases, can increase fuel economy. Important safety notice for methanol.

Aem strongly recommends that users never exceed a 50% concentration of methanol when using a water-methanol aem system or component. All water injection/methanol aem systems and components (pump, pipes, connections, filter, flow sensor, tank and nozzles) are 100% chemically compatible with methanol. However, for safety reasons, we strongly recommend that users never use a methanol concentration greater than 50% in our systems. Methanol is a toxic and highly flammable chemical.

100% methanol ignites easily and burns vigorously with an almost undetectable flame. Methanol can be absorbed by the skin and even small amounts can cause blindness or even death. The use of this high-pressure fluid, without dilution, in an environment under the hood with nylon pipes and push-to-connect connections is very dangerous. The performance benefits of using methanol concentrations above 50% are low or non-existent.

However, safety concerns are very real and far outweigh any perceived benefit from the use of high methanol concentrations. Please note: incorrect installation and/or adjustment of this product may cause significant damage to the engine/vehicle. For technical assistance, visit our forum or find a professional installer/tuner near you. Aem assumes no liability for any damage to the engine or body injury resulting from improper use of this product, including, but not limited to, injuries or death caused by improper handling of methanol. We try to answer the messages within 24 hours.

If you do not receive a response within 24 hours, please send us another message. We publish worldwide, so please contact us if you need a quote. Please note that some of our items are made to order and may have a delivery time of up to 14 days. Information on delivery times for all custom manufactured items will be included in the product description. We aim to deliver the items stored within 3 to 5 working days depending on the time of order and availability of our suppliers. If you are still waiting for your product after 10 business days, please contact us so that we can follow your article. Upon receipt of your order, you will be asked to sign for the goods received in good condition.

If the package does not appear to be in good condition, please refuse delivery. If you are unable to verify the contents at the delivery point, please sign for the package as "unchecked". Failure to do so may affect all warranty claims that you subsequently make. If you wish to return your item, please check that you are within the return time and contact us to arrange a return and refund. All items will be inspected upon return and a full refund will only be issued if the item is in satisfactory condition.

We will not be able to offer a refund for damaged goods. Return costs are borne by the buyer and are not refundable. 100% methanol ignites easily and burns vigorously with a flame. This item is in the category "auto, motorcycle - parts, accessories\tuning, styling\cooling\others". The seller is "wg_motorparts" and is located in this country: gb.

This item can be shipped to the following country: whole world.

hersteller-teilenummer: 30-3300