Aem V2 1 Gallon Water Injection Meth Kit (wmi) To Opel Astra Mk6 Gtc Vxr

  

Aem v2 1 gallon meth injection kit water (WMI) for astra j mk6 gtc vxr. This product sheet is originally written in English. Please find below an automatic translation in French. If you have questions please contact us. Aem v2 1 gallon meth injection kit water (wmi) for astra j mk6 vxr gtc a20nft 2.0T models.

Product Features: - \Dinjection pump water / methanol internally-bypassed does not work on a stop and provides a quiet, smooth. It provides a robust construction whose integral connecting hoses, gaskets EPDM and Santoprene membrane that provides a homogeneous fluid delivery and reliable -injecteur precision aluminum billet with integrated check valve -three interchangeable nozzles to cover a wide variety of levels hp 250cc / min, 500 cc / min + 1 000 cm3 / min -1 gallons (10 \/ methanol available aem part # 30-3302. Includes controller with sensor map 35 psi on board -20 feet dinjection tubes nylon -Table included LED light board to the state of the system and low fluid warning Please note: this kit is suitable for vehicles running at 35 lb / in2 or less.

If you run above 35 psi you need 30-3302. Water / methanol injection gas engine is a proven way to effectively reduce the temperature of the engine intake air and the removal of harmful detonation of forced induction and high-performance naturally aspirated race engines. This will reliably increase boost runners and ignition advance, without using fuel power gains for high-octane racing up to 20%. Water injection systems / methanol to aem use the more robust hardware combined with more advanced features than any other water / methanol comparable price.

The progressive controller on request kit boost injection of water / methanol pn30-3300 dependent laem dinjection flow bases on the pressure of admission to the help of a sensor board map (up to 35 psi boost) to dassurer sufficient dinjection water / methanol at every point along the power curve of a motor. Aem of engineers have spent much time developing the controller of flow control strategy for an exit delivery more linear flow. This means that the best delivery rate corresponds to the need for an engine for the water / methanol injection, which optimizes further cooling of the charge air and control detonation.

The new controller design features large, tower-resistant buttons and larger numbers to easily set specific start and complete activation points with status LED and covered with test buttons for added resistance to splashes. A stopper is integrated into the coupling housing to control the positive connector lock redesigned wiring harness. The controller dependent boost of the housing has a molded barbed nipple for accepting a supercharging pipe and a wiring legend at the rear, the integrated fuse and molded fixing lugs. Wiring load beam boost water / methanol injection aem kit is completed by a positive lock connector at one end and has color son for ease of installation.

The power and ground son for the pump are included in the harness that simplifies the cabling process and eliminates any chance of the pump accidental activation of a short in the system. An additional wire is included to add a start / stop magnetic option to stop the flow of fluid when the system is idle.

Boost dependent laem, compact tank 1 gallon of gasoline injection system pn 30-3300 water / methanol comprises a high technology low conductive fluid level indicator with a positive latch connector and color son attached to the cable harness. Boost functions of the onboard map load sensor controller with large control buttons taken for the integrated harness connection, integrated fuse status indicator and test button cover for resistance to splash and enhanced leg assembly. Wiring harness ends with a positive lock connector at one end with colored son son to facilitate installation, power and ground for the pump and the additional yarn optional start / stop magnetic fluid. Water injection Advantages / methanol to gas engines.

As he does this effect evaporative air reduces charging time by no less than 100 degrees and offers richer support dair oxygen. Reduces detonation (knock) the water absorbs heat, and methanol is a cool burning, anti-knock nominal fuel.

When combined and fed to the input current, they can actually increase anti-knock index of your vehicle so you can reliably increase the boost pressure and advancing the time of ignition using pump gas. Reduces modern vehicles equipped with carbon deposits gas recirculation (egr) for emissions control devices to promote carbon heavy build inside the air intake. This carbon buildup can create \Injection water / methanol has a \Important Safety Notice regarding methanol. Aem strongly recommends that users never exceed a methanol concentration of 50% when using any aem methanol water system or component. All dinjection AEM systems water / methanol and components (pump, lines, fittings, filters, flow sensor, reservoir and nozzles) are 100% chemically compatible with methanol. However, for security reasons we strongly recommend that users never nutilisent more than a concentration of 50% methanol in our systems. Methanol is a toxic and highly flammable chemical. 100% methanol senflamme easily and burns vigorously with a nearly undetectable flame.

Methanol can be absorbed through the skin and even small amounts can cause blindness or even death. With the help of this high pressure fluid without dilution in an environment under the hood with nylon lines and push-to-connect fittings is very dangerous. The performance benefits of use superior to 50% methanol concentrations are small, if they exist. However, security concerns are real and far outweigh any perceived benefit of high concentrations of methanol during runtime.

Please note: installation and / or the setting of this non-conforming product may cause engine damage / vehicle. For technical assistance, please visit our forum or find a professional installer / tuner near you. Aem nest holds no responsibility for any engine damage or injury resulting from abuse the use of this product, including but not limited to injury or death caused by the mismanagement of methanol. We try to respond to messages within 24 hours.

If you do not receive a response within 24 hours sil Please send another message. We post worldwide, so please contact us if you need a quote. To pay for an international order, sil please buy the item and we will adjust the cost before payment. Sil Please be aware that some of our items are made to order and can carry up to a period of 14 days. Information on deadlines for runtime all made to order items included in the product description.

Our goal is to deliver stored items within 3-5 working days depending on the time of order and availability from our suppliers. If you always wait for your product after 10 working days, please contact us so we can track your item. Upon receipt of your order, you will be asked to sign for the goods received in good condition.

If the package does not appear to be in good condition, so sil please refuse delivery. If you can not activate the content at the time of delivery sil please sign for the parcel as \Otherwise can affect any warranty claim you do there after. If you wish to return your item sil please make sure you are in the period of return and contact us to arrange a return and refund. All items will be inspected to return and a full refund will be issued only if the element is in satisfactory condition.

We will be unable to offer a refund for damaged goods. The item \\ fuel injection systems \ others. \The seller is \This article can be shipped worldwide.

1. manufacturer part number.