Width of the small end. 2 2.0 0 mm. 5 2.0 0 mm. Pec rods are designed to withstand almost 225hp per cylinder (typically 900hp on most 4cyl engine) and larp series 2000 3/8 bolts normally provided & have a 8500 limit of use of safe rev / min (specific engine ). In some cases, we recommend the help of the age personalized ARP bolts available from us.
This increases the hp to 250hp threshold per cylinder and raises the rpm limit to 9,000 while each engine is different, these figures are not guaranteed for all configurations. Own in house design facilities pec is capable of creating many different components, but for almost 10 years now, this is our rods that helped us stand out from the competition in terms of availability, ease of assembly and the size of beach.
Made from forged originally produced in Sweden, the pec rods offered tuners and engine manufacturers a cost effective and high performing solution to a wide variety of construction problems engine. Beam and in beam i section rods are forged steel AISI 4340 (EN24). The heat treated hrc 35-38 and then blasted for greater resistance to fatigue. Bits are banded dentrer a fully floating nip and large ends are fitted with different attachments with specifications of ARP bolts available depending on the level of performance demanded of high quality.
The pec rods were designed, manufactured and tested to the highest levels of control before being released for trade and the public in general and their record of success speaks for itself. We try to respond to messages within 24 hours. If you do not receive a response within 24 hours sil Please send another message. We post worldwide, so please contact us if you need a quote. To pay for an international order, sil please buy the item and we will adjust the cost before payment.Sil Please be aware that some of our items are made to order and can carry up to a period of 14 days. Information on deadlines for runtime all made to order items included in the product description. Our goal is to deliver stored items within 3-5 working days depending on the time of order and availability from our suppliers. If you always wait for your product after 10 working days, please contact us so we can track your item. Upon receipt of your order, you will be asked to sign for the goods received in good condition. If the package does not appear to be in good condition, so sil please refuse delivery. If you can not activate the content at the time of delivery sil please sign for the parcel as \Otherwise can affect any warranty claim you do there after. If you wish to return your item sil please make sure you are in the period of return and contact us to arrange a return and refund. All items will be inspected to return and a full refund will be issued only if the element is in satisfactory condition. We will be unable to offer a refund for damaged goods.
The item \\ \ porsche parts \ parts \The seller is \This article can be shipped worldwide.