Mk6 Opel Astra Opc Astra Vxr And (on 10) Powerflex Complete Bush Kit

Mk6 astra - astra j vxr and UCI (on 10) Full powerflex bush kit. This product sheet is originally written in English. Please find below an automatic translation in French.

If you have questions please contact us. Kit complete bush powerflex for mk6 astra - astra j vxr & UCI (10 on). To get help to identify the location of the rings in this kit on your vehicle, please refer to the diagram below. Note: we have not included the suspension stops or exhaust rubbers in this kit because many cars driven on the track already include modified versions of these items. Definition of `` full / complete kit. In no case it should be considered a complete list of all the rings and brackets mounted behind the vehicle as it may well be several other items as the original manufacturer product powerflex but does not yet , we do not include the suspension. Axial shock or rubber exhaust.

To make sure the contents of the kit, please refer to the car diagram and list of references below. Road cars - fast road cars and modified - racing cars and racing?

What type of sleeves powerflex do you need? Before ordering these brilliant powerflex bushes, just ask yourself what you want them to perform. If you replace the old original parts, worn or of poor quality and want a better handling, less tire wear and increased security, the purple rings, yellow and rouges'powerflex road series'sont made for you.

If you intend to use your car track days and during race meetings, bushes \The black rings are stiffer than versions'road series'et this will create a higher level of vibration throughout the car, so we do not recommend for everyday driving on the road! This kit contains the following: where there is an option (or) please tell us where you want us to send you with your kit. Diagram 1 ref: front arm bush before. Pff80-1401 (amount 2) ref scheme 2: front arm rear bush.

Pff80-1402 (quantity 2) diagram ref 4: Hyper Strut to lower arm bush front. Pff80-1404 (amount 2) diagram ref 10: rear beam mounting sleeve.

Pfr80-1410 (amount 2) diagram ref 11: outer sleeve panhard rod rear. Pfr80-1411 (amount 2) diagram ref 20: Mounting insert front of the engine. Pff80-1420 (amount 1) Scheme ref 21: rear mounting insert the motor.

Pff80-1421 (amount 1) not in the diagram: kit bolts camber poweralign (12 mm). The kit contains the following mounting notes concerning the items it contains. Pff80-1420 - only suitable vxr models UCI pff80-1421 - only suitable vxr models UCI pfa100-12 - kit contains 2 camber bolts, washers and nuts tongue. Camber adjustment bolt for replacing the original bolt 12 mm.

Why not add our magnetic camber gauge your tool kit so you can make adjustments to your garage with suspension bolts camber poweralign. To ensure correct installation, please use the other above specification data to help you. If you are still unsure, do not hesitate to contact us with your car registration number in the UK or your chassis number and we will be happy to help you identify the right parts necessary before ordering. We ship powerflex products worldwide. We also sell various other powerflex bushings for this model.

These may include items such as rings of suspension arms, anti-roll bar bushings, steering rack bushings, stops suspension of the rear axle rings, etc. The bushes are one of the most stressed components of a car. They are under enormous effort in the most difficult conditions, no maintenance or lubrication. The conventional rubber pads deteriorate with age, which enables movement of suspension components and geometry. This can lead to tire wear, braking instability, poor handling and poor deformation of the engine. Powerflex rings are manufactured from a technologically advanced polyurethane plastic compound. This compound overcomes the common problem associated with harder bushes which is increased noise. With proper engineering, polyurethane rings can be 25 to 30% stiffer than rubber rings but with exactly the same noise absorbing properties.

We also sell powerflex rings for most other car brands. C & R sells a wide range of spare parts and high performance for your VW, Audi, Skoda and seat. Store only the highest quality brands such as: k & n, black diamond, Goodridge, piper, Kent, Jetex, superpro, powerflex, Prothane, vibrated technics, redline, eibach, and Koni Weitec.

We not only are \. Companies c & r volkswagen specialists, Audi, seat and Skoda. Since 1988 we repair, modify and sell parts for cars of the VAG group of technical advisers magazine \guided to the right part for your car we can solve and repair your vehicle in our workshops. Kit complete bush powerflex for mk6 astra - astra j vxr & UCI (10 on) definition of a `` complete kit / complet''ce kit contains the following: Diagram 1 ref: front arm bush before. Pff80-1404 (amount 2) diagram ref 20: Mounting insert front of the engine.

Pff80-1420 (quantity 1) pff80-1420 - only suitable vxr models UCI pff80-1421 - only suitable vxr models UCI powerflex we ship products anywhere in the world. Companies c & r volkswagen specialists, Audi, seat and Skoda technical advisers of the magazine \Astra mk6 - astra j vxr & UCI (10 on). The item \\ sleeve bearings \The seller is \This article can be shipped worldwide.

brand: powerflex <\/ li>
Model: astra mk6 - astra j vxr & UCI (on 10) <\/ li>
manufacturer part number: pflexk1007 <\/ li>
Manufacturer: Opel <\/ li> <\/ Ul>